INKBIRD, Moisture regulator / controller with 2M probe, IHC-200, controls humidifier / dehumidifier , regulates humidity

The IHC-200 professional humidity controller with probe on 2m cable will allow you to accurately control your humidifier and/or dehumidifier to maintain the desired humidity in the room. Easy to program provides accurate measurement of air humidity.

The device can control a humidifier and a dehumidifier/air ventilator simultaneously. It has two sockets into which 1x humidifier and 1x dehumidifier/fan can be plugged simultaneously. The controller will automatically switch both plugged-in devices to maintain humidity at the level we program ourselves. Depending on the need, it will switch on/off the hum idifier(when the air is too dry) or the dehumidifier, exhaust fan (when humidity exceeds the maximum value programmed by us).

Such a device helps to protect our room from fungal diseases (not allowing excessive humidity) while allowing us to maintain the optimum humidity for the crop. Controlling the humidity simultaneously in both directions (increase / decrease) can be particularly useful when the day / night cycle changes.

There is no obligation to plug both devices into the controller. According to the need, you can connect only one device (humidifier / dehumidifier) and then our controller will work only unilaterally (only humidifying or only dehumidifying).

The device can control any humidifier and/or dehumidifier/air fan with a power supply voltage of 100-240V.

Main Functions:

• automatic power switching between
• humidification/humidification
• humidity control by setting the desired humidity and humidification/humidification range
• calibration of humidity readings
• possibility to set an alarm for exceeding the set humidity parameters (low/high)
• alarm when a humidity probe fails in the device

Technical data:

Power supply voltage: 100-240VAC, 50Hz/60Hz

Max output voltage: Max. 10A, 100-240V AC

Controller current consumption: <3W

Humidity measurement range: 5%-99.9% RH

Humidity control range: 5%-99% RH

Display accuracy: 0.1% RH

Measurement accuracy: +/- 3% RH

Humidity probe type: HTG3535CH

Probe measurement stability: <0.5% / year

Probe cable length: 2 m.

Output socket load: 12A, 100-240V AC

Power cord length: 1.5 m.

Lengthof outlet cable: 30 cm.

Dimensions:

Controller: 140x68x33mm, sockets:135x54x40mm

Operating temperature range: -30°C - 75°C

Storage conditions: -30°C - 75°C, 20-85% humidity

The device is covered by a one-year warranty - the basis for recognition of the warranty is a document confirming the purchase - invoice or receipt.

The humidity controller meets the requirements of safety of use, functionality and technical usability. This is confirmed by the certificate: CQASZ20200600599E and therefore the device is CE marked.