- -7%
ELECTRONIC MONITOR of pH, EC, CF, PPM and TEMPERATURE - P700 PRO2 COMBO AQUA MASTER TOOLS
With the Bluelab Multimedia meter, we can measure pH levels
Security
SSL encrypted website, Dutch dedicated server
Discreet shipping
There is no sender information on the package
Returns
14 days to return without stating a reason
Średnia ocena: 4.6 (92%)
Na podstawie: 8 ocen
Na podstawie: 8 ocen
P700 Pro 2 pH, EC and temp monitor for continuous measurement
The refurbished Combo P700 Pro 2 meter has a modern, durable housing. It is also equipped with a large screen on which all values can be read. In addition, the software has been improved, so accurate measurements can now be read faster. The electrodes are easy to replace if they become worn or damaged.
The Combo P700 Pro 2 meter is ideal for measuring pH, EC, CF, PPM and temperature of water for plant nutrition and water in pools, hot tubs and ponds. With easy-to-use buttons, you can easily switch between parameters. The meter is calibrated and comes with batteries.
How to use.
1 Plug the power adapter into an electrical outlet and connect the USB connector to the meter.
2. connect the pH and EC electrode to the meter.
3. remove the protective cap from the pH and EC electrodes.
3. turn on the meter.
4. dip the pH and EC electrodes into the test liquid and stir gently until the reading stabilizes.
5. press the C / F button to switch between degrees Celsius and Fahrenheit.
6. press the MODE button to switch between EC / CF and PPM measurements.
7. turn off the meter after use.
8. Clean the pH and EC electrodes with tap water to minimize the risk of contamination.
9. Place the pH and EC electrode back into the protective cover.
You can also use the meter continuously and keep the electrodes in the liquid to be measured. Note then that they require more frequent calibration. It is also important to check for algae deposits on the electrodes and, if necessary, to clean the electrodes thoroughly.
|
Range |
|
pH: 0.0 - 14.0 pH |
|
Accuracy |
|
pH: ± 0.1 pH |
|
Margin of error |
|
pH: ± 0.1 pH |
Temp: |
±0.5°C (32°F) |
|
PPM scale |
|
700 PPM |
|
Calibration |
|
pH: automatic, 2-point 4.0 - 7.0 pH EC: automatic, 1-point 1 |
4 - 3.0 - 12.88 EC |
|
Features |
|
Battery indicator & automatic temperature compensation |
|
Power supply |
|
6 V DC power supply + built-in battery |
|
Indicator |
calibration |
|
With correct calibration |
|
Waterproof |
|
IP65 (electrodes IP67 ) |
|
Dimensions |
|
200 x 140 x 34 mm |
|
Weight |
|
|
g |
Warranty:
12 months - device
6 months - electrode
Due to thefact that more than half of the devices returned to the claim did not meet its conditions:
-We recommendbefore filing a claim (and more) to put the probe in cleaning liquid (HCL) for 30min, then for 20h in storage liquid (KCL), then calibrate it with the appropriate fluid(s)
Specific References
Useful accessories
